01695 280510


01695 280510
Download Product PDF

Odour Control Cover

GRP Odour Control Covers can be produced in two forms one moulded for larger areas or an interlocking grp plank

Odour Control Covers

GRP Deck 500


GRP Odour Control Covers are a one-piece pultruded profile, 500mm over width and 40mm thick, with a tongue and groove joint along the length of the plank that gives a firm, sealable joint between lengths of profile.
Odour Control covers give a solid floor with a gritted anti-slip surface. It will span 1.5m at a design load of 5kN/m2 with a deflection limit of L/200 and meets all the requirements of BS 4592-4 Industrial type flooring and stair treads Part 5: Solid plates in metal and glass reinforced plastics (GRP) Specification and BS EN ISO 14122 part 2 - Safety of Machinery Permanent means of access to machinery.
Our GRP interlocking Decking system meets all the requirements of EN 13706 Specification of grp profiles Grade E23 and is manufactured under ISO 9000 registered quality control system.
GRP DECK 500 is suitable as a mezzanine floor, for walkways, pedestrian bridge decks and odour control covers or to keep out water penetration in potable and waste water treatment units.
Deck 500 can be used in a number of other applications where its strength, light weight and easy of joining provide important benefits. For example:

  • Deck 500 can be used as deck covers for cooling towers
  • Baffles in water treatment tanks
  • Stop locks
  • Flood defence barriers easy to install, no theft value
  • Odour Control Covers


Deck 500 


Mechanical Properties for Odour Control Covers
The following data has been calculated from measurements made of the full section modulus - EN 13706, Annex D

Load Table


 As an alternative we can offer moulded option for covers such as the following:


grp covers


GRP Covers

Advantages of GRP Covers

GRP Covers are designed, manufactured and installed to protect the environment against any odours in a very corrosive atmosphere.
GRP Odour Control Covers are designed to British & European Standards incorporating specific Customer preferences.

Areas to Cover – Sewage Treatment

               Inlet Channels 
               Screen Area  
               Sludge Tanks 
               Outlet Channels  
               Wet Wells  
               Pumping Stations  
               De-sludge chambers  
               Screw Pumps

Areas to Cover – Clean Water Treatment 

               Inlet Channels 
               Screen Area 
               Settling Tanks 
               Outlet Channels


odour control covers